|
|
Online shop |
|
We supply a range of jacket heaters for a wide variety of plastic, metal and fibre containers including standard drums & IBCs.
High quality insulation and direct contact with the drum ensures much higher efficiency than can be obtained with traditional band heaters
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard heaters are suitable for use in non hazardous atmospheres. Thermosafe drum & process inductance heater is ATEX certified (Zones 1&2 - Ex II 2GD Eex e T3 170°C) |
- 1250W high power drum heater (shown right) for heating drum contents
- 450W heater (shown left) typically used for maintenance of drum temperature
|
|
450W heater |
|
High power - 1250W |
|
|
|
|
|
|
Thermosafe |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- IBC1 (1300W single heated jacket - shown above) typically used for maintaining temperature of vegetable oil feedstock and is supplied with -5 to 40°C thermostat as standard
|
|
Construction |
- Scuff and water resistant polyurethane coated nylon outer surface fitted with adjustable retaining straps and quick release polyethylene clips
|
|
|
|
|
- High thermal efficiency layer of insulation between outer cover and inner element carrier
- Woven silicon insulated heating element
|
Efficiency |
High quality insulation and direct contact with the drum - ensures much higher efficiency than can be obtained with traditional band heaters :
|
|
|
|
|
- Less heat loss to surrounding air
- Cooler outer surface
- Reduced electricity consumption
|
|
Options |
- Standard units 240V
- Also available 110V / -5 to 40°C thermostat / 0-90°C thermostat
|
|
|
|
|
|
|
|
- IBC2 (2200W - 2 x 1100W - double heated jackets) typically used for pre-heating vegetable oil feedstock. Upper & lower jackets can be used independently e.g. if IBC is partially full, or lower power required for maintenace of IBC temperature. Supplied with 0 to 90°C thermostat as standard
|
|