Biodiesel antioxidants - Baynox & Baynox Plus - Biodiesel Stabiliser |
Online shop | ||
Click on image above to download Baynox brochure in PDF format |
||
Biodiesel oxidation - a big problem... |
||
Unlike mineral diesel, biodiesel is perishable and starts to oxidise as soon as it has been produced. It reacts with atmospheric oxygen to produce volatile compounds, corrosive carboxylic acids and polymerized / cross-linked biodiesel gums that can damage diesel engine components. Already certain fuel pump manufacturers have withdrawn warranties for B100 because of such gums and residues which are not due to biodiesel itself, rather the biproducts of biodiesel oxidation. | ||
Baynox® and Baynox Plus prevent the premature oxidation of unsaturated biodiesel esters and hence the formation of these problematic biproducts - keeping biodiesel fresh and extending it's shelf life. | ||
Baynox ® Solution |
||
|
||
|
|
|
|
||
|
||
|
||
|
||
|
||
|
||
Usual addition rates are 0.1% to 0.5% by volume |
||
|
||
Baynox® Solution is available to buy online |
||
Product Information |
Baynox® Solution Biodiesel Stabiliser |
|
Form |
Liquid |
|
Composition |
1 litre contains minimum 200 g 2,6-Di-tert.-butyl-4-methylphenol dissolved in Biodiesel (min. 225 g/kg) |
|
CAS-No.: 000128-37-0 (2,6-Di-tert.-butyl-4-methylphenol) |
||
CAS-No.: 67762-40-7 (biodiesel) |
||
Description |
Clear, slightly yellow liquid with a characteristic odour of Biodiesel |
|
Miscibility |
Very good miscibility with biodiesel and organic solvents* |
|
Not miscible with water* |
||
Density at 20°C |
Approx. 0.89 g/l* |
|
Viscosity at 20°C |
9.9 mm2/s* |
|
Residue after ignition |
Max. 20 ppm* |
|
(active ingredient) |
||
* Provided as general information only. They are approximate values and are not considered part of the product specification | ||
Baynox ® Plus Solution |
||
|
||
|
||
|
||
Can also be supplied in pure crystalline form |
||
Baynox® Plus Solution Biodiesel Stabiliser is a mixture of 20% high purity Baynox Plus dissolved in specially manufactured high-purity RME biodiesel which meets both E DIN 51606 and EN 14214 |
||
Baynox® Plus does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labeling in line with the Regulations on Hazardous Substances. It is not subject to the Regulations on Flammable Liquids (VbF). |
||
|
||
Usual addition rates are 0.05% to 0.5% by volume (i.e. 0.5 – 5 litres made up to 1,000 litres with biodiesel) |
||
Baynox® Plus Solution is available to buy online |
||
Product Information |
Baynox® Plus Solution Biodiesel Stabiliser |
|
Form |
Liquid | |
Composition |
1Kg contains minimum 200g 2,2'-Methylenebis(4-methyl-6-tert-butylphenol) | |
CAS No.: 119-47-1 - 2,2'-Methylenebis(4-methyl-6-tert-butylphenol) | ||
CAS-No.: 67762-40-7 - biodiesel | ||
Description |
Clear, slightly yellow to reddish liquid with a specific odour of biodiesel | |
Miscibility |
Micsible with all proportions of biodiesel | |
Not miscibile with water | ||
Density at 20°C |
0.89 kg/l | |
Ash |
< 200ppm | |
Disclaimer: |
The information provided above is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Any advice provided does not release you from the obligation to check its validity and to test the products as to their suitability for the intended processes and uses. The application, use and processing of this product and the products manufactured by you are beyond our control and, therefore, entirely your own responsibility. | |
Home | About | Products & Services | Biodiesel Information | Online Shop | Contact us | Links |