Baynox® Additives:
Unlike mineral diesel, biodiesel is perishable and starts to oxidise as soon as it has been produced. It reacts with atmospheric oxygen to produce volatile compounds, corrosive carboxylic acids and polymerized / cross-linked biodiesel gums that can damage diesel engine components. Already certain fuel pump manufacturers have withdrawn warranties for B100 because of such gums and residues which are not due to biodiesel itself, rather the biproducts of biodiesel oxidation
Biodiesel Oxidation - A Big Problem
Baynox® and Baynox Plus® prevent the premature oxidation of unsaturated biodiesel esters and hence the formation of these problematic biproducts - keeping biodiesel fresh and extending it's shelf life
Baynox® Solution:
Suitable for making biodiesel storage-stable
Recommended for biodiesel produced from used cooking oils or rapeseed oil
Liquid form makes dosing and mixing simple
Can also be supplied in pure crystalline form
Available in quantities of 1 litre bottle, 25 litre drum, 200 litre barrel, 1,000 litre IBC, Isotank or road tanker delivery
Baynox® Solution Biodiesel Stabiliser is a mixture of 20% high purity Baynox dissolved in specially manufactured high-purity RME biodiesel which meets both E DIN 51606 and EN 14214
Baynox does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labelling in line with the Regulations on Hazardous Substances. It is not subject to the Regulations on Flammable Liquids (VbF)
Required treat rate is dependent upon the natural stability of the biodiesel used. The customer must determine the required dosage and check compatability with the biodiesel they have produced
Usual addition rates are 0.1% to 0.5% by volume
(i.e. 1–5 litres made up to 1,000 litres with biodiesel)
Baynox® Solution is available to buy online
Baynox® Plus Solution:
Suitable for making biodiesel storage-stable
Baynox® Plus is effective for all types of biodiesel. It is particularly suited to more highly persihable types of biodiesel such as biodiesel produced from Soy, Sunflower or Jatropha oils.
Liquid form makes dosing and mixing simple
Can also be supplied in pure crystalline form
Available in quantities of 1 litre bottle, 25 litre drum, 200 litre barrel, 1,000 litre IBC, Isotank or road tanker delivery
Baynox® Plus Solution Biodiesel Stabiliser is a mixture of 20% high purity Baynox Plus dissolved in specially manufactured high-purity RME biodiesel which meets both E DIN 51606 and EN 14214
Baynox® Plus does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labelling in line with the Regulations on Hazardous Substances. It is not subject to the Regulations on Flammable Liquids (VbF)
Required treat rate is dependent upon the natural stability of the biodiesel used. The customer must determine the required dosage and check compatability with the biodiesel they have produced
Usual addition rates are 0.05% to 0.5% by volume
(i.e. 0.5 – 5 litres made up to 1,000 litres with biodiesel)
Baynox® Plus Solution is available to buy online
Disclaimer: The information provided above is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Any advice provided does not release you from the obligation to check its validity and to test the products as to their suitability for the intended processes and uses. The application, use and processing of this product and the products manufactured by you are beyond our control and, therefore, entirely your own responsibility.
